How To Explain Ghost Ii Immobiliser To Your Grandparents

Ghost II Immobiliser

Guard your vehicle from hacking, key-cloning and car theft. It is completely silent and unnoticeable by potential thieves since it does not use LED indicators or key-fobs to alert thieves to its presence.

It is also possible to temporarily disabled by using Transport Mode for scenarios like transporting vehicles or when your vehicle is being repaired.

Simple process to change the PIN code

Ghost is a revolutionary next generation security device that can secure your vehicle without cutting wires or adding an aftermarket alarm system or immobiliser key fobs. It connects directly with the vehicle's CAN Data Network. A personalized PIN code can be programmed by using the factory buttons located on the dashboard and the steering wheel. This code will stop the engine from starting and is inaccessible to any RF scanning technology or code-grabbing technologies used today.

The system also has an emergency Pin Code override in case the user forgets their code or a button for programming becomes inoperative. It also has the option of a service/valet mode which lets the vehicle to be started temporarily and drove without requiring an authorization code. This makes it suitable for servicing or transport.

The UK automotive aftermarket, despite thriving, is not immune to theft. Thieves can easily bypass the most common deterrents, such as locking your steering wheel and your wheels by hacking the OBD port in your vehicle. This can be done with an laptop, a USB cable, and a low-cost OBD scanner that can be purchased online for under PS50.

It is essential to secure your vehicle with an immobiliser for Ghost II to prevent theft. It's a small device that can prevent theft of your vehicle. Once you know your PIN number, it is easy to use. The device is sealed inside a tiny box and can be placed in the wiring harness of your vehicle. It is also weatherproof and can be placed anywhere in your car and is therefore difficult for thieves to locate. In addition to this the device is simple to install and comes with a guarantee.

Small device that is weatherproof

The device connects to the CAN data network inside your vehicle without cutting cables and operates quietly. The device can be programmed to have an individual PIN by using the buttons on your dashboard and the steering wheel. This will help prevent theft. The device is equipped with an GPS tracker built-in. It is activated by an app that you can download on your phone and is recommended by a variety of insurance companies. It is weatherproof and can be hidden in the car, making it nearly impossible for thieves to find.

Ghost II is completely silent, in contrast to traditional systems that are heard by criminals. It requires between 4 and 21 button presses on the buttons of the vehicle. The sequence can be set by the owner of the vehicle to their preference, and the sequence cannot be re-enforced. There is a free mobile phone App that can be used to disable the system, and in the event that you sell your vehicle there is an official reset code that can reset the CAN bus immobiliser.

Modern thieves can utilize diagnostics to identify circuit breakages on modern cars however, the Ghost is not equipped with circuit cuts. Consequently, it is an extremely secure and reliable system that can be fitted on the vehicle by our skilled team of CANbus immobiliser fitting technicians.

In contrast to other CANbus immobilisers, which may require the use of keys and a key fob, the Ghost is compatible with all kinds of vehicles. The technology behind it is so advanced that it protects against a range of security threats, such as signal relay attacks and ECU swapping. It is compatible with a wide range of smartphones and will send notifications to owners when their vehicle is driving in a way that is not authorized.

Tested for each vehicle

Ghost is the only immobiliser available on the market that will protect your vehicle from key hacking, cloning, and even theft of keys. A criminal would need to physically remove the device from your car, take it away in an enclosed trailer, and then reinstall it on another to steal the Ghost secured vehicle. It also shields against the use of wheel locks, jumper cable and universal keys.

This simple to install system works in a quiet manner and connects to the vehicles CAN data circuit, which allows it to communicate directly with the ECU (Engine Control Unit). It is completely sealed and small that it can be tucked in your vehicle harness and put in any place, making it nearly impossible for a thief to recognize.

Once it is installed, it stops your vehicle from starting until the disarming sequence has been entered by pressing the buttons on the steering wheel, door panels or centre console. You can set it up to 20 numbers and decide how secure you'd prefer to make it. You can also use it to activate the service/valet mode that allows you to temporarily start your car and drive it without entering your PIN.

It uses an CAN data circuit, which means that there aren't radio frequencies like the traditional immobiliser. This means that a burglar cannot listen to the relay and attempt to determine the PIN code that is entered. It is not equipped with circuit breakers and cannot be detected using the diagnostic tools, RF scanning, or code-grabbing technologies.

Boundary Car Care is proud to be an authorized installer of this wonderful product. We are very impressed with its performance and the peace of mind it offers our customers. It is a great way to safeguard your pride and happiness in these challenging times.

Emergency Pin Code Override

The Ghost immobiliser is a tamper-proof and weatherproof device that stops your vehicle from starting without the correct PIN code entered. It's hidden in your vehicles wiring harness and utilizes the buttons on your steering wheel / dashboard to generate an individual code sequence that has to be entered to start your vehicle. It's not a Thatcham device, as it does not have LED indicators and is connected to your vehicle using the CAN system. This makes it inaccessible by professional thieves who are able to detect alarm/immobiliser systems within modern vehicles using readily available diagnostic tools.

Entering an emergency override into the app on your phone will temporarily disable your Ghost immobiliser. This allows you to lend your car to a friend, family member or valet without sharing your pin number. It is ideal for situations such as servicing, or if you need to leave your car at valet parking or garage.

Ghost can be used in conjunction with the driver fob. This lets you start your car with your key or via the app. This is great for those with children who are young and want to drive the vehicle, or you're not able to enter your pin code quickly or if you want to utilize the vehicle in case of emergency like a breakdown.

With a simple PIN change procedure, a user-friendly interface, and multiple security features, it's no wonder that the Ghost immobiliser is endorsed by a wide range of insurance companies and backed up by a security warranty. Its sleek compact design, sleek appearance and seamless integration with your vehicle's current systems make it an indispensable accessory to any performance or classic vehicle.

Service/Valet Mode

The Ghost immobiliser can prevent theft of vehicles by blocking the communication between the key and the ECU. This means the engine won't start without a specific PIN. It's also hidden within the wiring allowing it to remain unnoticed, and it does not use LED indicators that could signal its presence. This is a great option when you need to hand over your car to a mechanic or valet parking. To activate valet mode, enter the code that was handed to you by your engineer on the completion of the installation it will allow them to start your car without having to enter the disarm sequence. To exit valet mode, return your car to normal operation and the code will change back to your normal pin.

Contrary to other security products that rely on vehicles buttons or key-fobs Ghost is designed to integrate into your cars CAN bus system. This gives it unrivalled protection against modern theft techniques such as key hacking and cloning.

Once installed,  ghost immobilise  will guide you on how to arm, disarm and valet mode your vehicle. All of this is done using your smartphone application. Your engineer will generate a unique pin that's simple to remember, but mathematically inaccessible to thieves. If you forget it, don't worry as every installation comes with a Emergency PIN Code Override to make sure your vehicle is working.

Our installers are highly skilled and have been trained to ensure that your Ghost is installed correctly. All of our installations are completed at the premises of our customers and we give a brief explanation on how to operate the device and mobile app. Once Ghost is installed, we guarantee the performance of the device.